We can supply ALL Eibach products, including Lowering Springs, Coilovers, Anti-Roll Bar/Sway Bar Kits, Spacers etc. If not separately named, vehicles with OE-lifted suspension e. Offroad-Package, Crossover are excluded from use of Eibach products. The specifications indicated in the Components Certificate are for the classification of the item / vehicle.Please check the type Components Certificate number of your car and compare with the Components Certificate. Letter K in your vehicle registration certificate or to find at the type plate of your car! -Please verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use). In case of non-conformance the items must not be fitted? Please refer to your dealer. Mounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online. Mounting position - you can read the mounting position of the springs from the imprint - have them installed just the way you read the imprint. Wheel adjustment - after completion of the spring/suspension installation, checking the wheel adjustment is required. Shock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage. The installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8 -Here all wheel/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required. Depending on engine, gearbox/transmission, equipment and vehicle tolerances lowering may differ from the values given.
The applicability of Eibach products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system e. Ceramic-brakes, sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of Eibach products may be excluded. The stated measurements are referring to new standard cars.Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.
A7If your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code.
This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code. In combination with Eibach suspension springs or original suspension.In some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.
This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Performance Suspension\Performance Sway Bars". The seller is "wg_motorparts" and is located in this country: GB. This item can be shipped worldwide.